Steam Cleaners Gas Fired 181-NG Alkota

Steam Cleaners Gas Fired 181-NG Alkota

Steam Cleaners Gas Fired Model 181-NG by Alkota is built for cleaning grease and oil, sterilizing, disinfecting, degreasing, de-icing, and flushing away chemicals, without damaging your cleaning surface. Gas fired steam cleaners by Alkota are built with a stationary frame with a natural updraft burner system. The stationary frame will provide a long life and easy serviceability. The Model 181 will deliver 300 - 350 degrees of steam 3 GPM @ 250 PSI for your cleaning needs. Since steam cleaners operate at lower pressures than your standard hot water pressure washer they are safe to use in cleaning sensitive areas such as engine compartments, transmissions, and heavy equipment. With the support of your local Alkota dealer we can find the correct solution for you.

Specifications

Specifications

Steam Cleaners Gas Fired 181-NG Alkota
Coil TypeSchedule 40
Motor Voltage115 v
Weight600 lbs
Amp Requirement20 amp
Horsepower2.3 hp
Standard Parts/FeaturesTemperature Control
Chemical FeaturesHigh Pressure|Precise Metered
Hose Diameter3/8 in
Steam Capacity180 gal/hour
Coil Construction TypeHydro insulated cold water wrap
Hose Length50 ft
Steam Pressure250 psi
Float Tank Construction MaterialStainless Steel
Natural Gas Consumption467 ft³/h
Width22.5 in
Gas Burner, Natural Aspirating NG / LP490000 Btu
Phase1
Height54 in
Pump StyleOil Bath Crankcase|Triplex Ceramic Plunger
Coil Inner Diameter5/8 in
Length48 in
TypeNatural Gas / LP
Coil Length243 ft
Manufacturing NotesMotor/Voltage: Special voltages on request.
Wand TypeOpen-Standard